Polytcab®-Music : acoustic booth

Advantages

• 
  Cable passer brushes

  Our brushes, made of polypropylene and nylon, are designed for long-term use and are particularly easy to use. Our cable passes are specifically designed not to disrupt sound insulation.

• 
  "Silent" acoustic glazing

  Our booths are the most soundproof in our range. Their insulating glazing made of 44.2 “silent” laminated glass extends from edge to edge of the panels. Noise is greatly reduced in both directions : inside to outside and vice versa.

• 
  Simplified assembly

  Our booths can be assembled in ten minutes by a single professional. Our booths have no posts, making them lighter and easier to assemble.

• 
  Door sill bottom

  Our door sill bottom (only 35 mm).

• 
  Ultra-quiet ventilation

  For occupants in recording studio booths, it is essential to have adequate ventilation, especially during extended periods of booth use. We integrate either fans within the thickness of the roof panels of our booths or add ventilation blocks (with better acoustic insulation) above the roofs of our booths.

• 
  LED lighting

  Our booths can be equipped with LED strips spanning the entire width of the booth. The intensity is adjustable through a touch switch (0% – 20% – 40% – 60% – 80% – 100%).

  Placed at the center of the booth, they provide completely uniform illumination to the work surface. Moreover, LED lighting, being non-heating, does not contribute to the internal warming of the booth during prolonged use.

  Integrated into the thickness of the roof panels, there is nothing protruding either inside or outside. The electrical supply is done through the same power source as the ventilateurs.